登录  
 加关注
查看详情
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

lzzyyz89的博客

音乐,书,针线,茶.阳光.快乐!

 
 
 

日志

 
 

引用 网上分享图--很特别的花样   

2012-07-10 04:45:58|  分类: 围巾 |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
原贴链接

FINISHED MEASUREMENTS Length: 60 inches Width: 8 inches

MATERIALS Jaeger Matchmaker Merino 4-ply [100% Merino Wool; 200yd/183m per 50g ball]; color: Anthracite; 4 balls
1 US #2/2.75mm circular needle, 32 inches or longer
1 US #3/3.25mm circular needle, 32 inches or longer
Approx. 4 yd smooth waste yarn of similar gauge/weight to working yarn, in contrasting color
Tapestry needle  GAUGE28 sts/36 rows= 4 inches in stockinette stitch using US#3/3.25mm needle

网上分享图--很特别的花样 - 彩虹桥 - 彩虹桥
 
网上分享图--很特别的花样 - 彩虹桥 - 彩虹桥
 
网上分享图--很特别的花样 - 彩虹桥 - 彩虹桥
 
网上分享图--很特别的花样 - 彩虹桥 - 彩虹桥
 

PATTERN NOTES

If substituting yarn, choose a fingering or sock-weight yarn, as the stitch pattern produces a fairly dense fabric. You're trying to create a soft fabric that drapes well with just enough substance to hold its own shape and show off the pattern.

Because of the large number of stitches on the needle, check your work often to be sure the stitch pattern is lining up correctly. They’re long rows to work backwards if you make a mistake!

If changing the number of sts in the scarf (to make the scarf longer or shorter), be sure you have a multiple of 4 sts. When casting on using the waste yarn, CO half of the desired number of sts, plus 1.

The stitch pattern, Woven Transverse Herringbone, is taken from Barbara Walker's Treasury of Knitting Patterns, pg. 96.

Wyif: With yarn held to front of work
Wyib: With yarn held to back of work



PATTERN

Set-up Rows:
Using waste yarn and smaller needle, CO 227 sts.
Using working yarn, work as follows:
Row 1 [WS]: K1, [k1, yo] to last st, k1.
Row 2 [RS]: [Sl 1 wyif, k1] to end. [452 sts]
Row 3 [WS]: Sl 1 wyif, k1, sl 1 wyif, p to last 3 sts, sl 1 wyif, k1, sl 1 wyif.



Scarf Body:
Using larger needle, proceed as follows:
Row 1 [RS]: K1, sl 1 wyif, k3, [sl 2 wyif, k2] to last 3 sts, k1, sl 1 wyif, k1.
Row 2 [WS]: Sl 1 wyif, k1, sl 1 wyif, p1, [sl 2 wyib, p2] to last 4 sts, p1, sl 1 wyif, k1, sl 1 wyif.
Row 3 [RS]: K1, sl 1 wyif, k1, [sl 2 wyif, k2] to last 5 sts, sl 2 wyif, k1, sl 1 wyif, k1.
Row 4 [WS]: Sl 1 wyif, k1, sl 1 wyif, p3, [sl 2 wyib, p2] to last 6 sts, sl 2 wyib, p1, sl 1 wyif, k1, sl 1 wyif.
Rows 5-12: Repeat Rows 1-4 twice more.
Row 13 [RS]: Work as for Row 3.
Row 14 [WS]: Work as for Row 2.
Row 15 [RS]: Work as for Row 1.
Row 16 [WS]: Work as for Row 4.
Rows 17-24: Repeat Rows 13-16 twice more.
Repeat Rows 1-24 six times more.

Ending Rows:
Using smaller needle, proceed as follows:
Row 1 [RS]: K1, sl 1 wyif, k to last 2 sts, sl 1 wyif, k1.
Row 2 [WS]: [Sl 1 wyif, k1] to end.
Row 3 [RS]: [Sl 1 wyif, k1] to end.

Binding Off:
The scarf is bound off using a tubular bind off. Break the yarn, leaving a tail of a comfortable working length; approx. 2yd is recommended. You will need to join a new length of yarn at some point during the bind-off, but a tail of sufficient length to bind off all sts would be cumbersome and prone to tangling. Thread the yarn tail on the tapestry needle.

Read through the following steps before beginning. Turn needle to have WS facing. There are two types of sts on the needle: purl sts and knit sts. The purl sts are the knit sts from previous row. The knit sts are the slipped sts from previous row. The first st on the needle as you begin should be a purl sts followed by a knit st.

Step 1: Insert tapestry needle from right to left through first 2 sts on left needle (a purl st and a knit st). Drop sts on tapestry needle from left needle and draw yarn through.
Step 2: Next st on left needle should be a purl st. Insert tapestry needle through slipped st from left to right and draw yarn through. Do not drop from left needle.
Step 3: Insert tapestry needle from right to left through last st dropped from left needle (at end of Step 1), then through second st on left needle (a knit st). Draw yarn through; do not drop any sts from left needle.
Step 4: Insert tapestry needle from right to left through first st on left needle. Draw yarn through and drop 2 sts from left needle.
Repeat Steps 2-4 until all sts have been bound off. FINISHING

Carefully remove waste yarn from CO edge. Work will not unravel; the tubular CO edge will match the BO edge.
Weave in all ends.

  评论这张
 
阅读(81)| 评论(0)

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2018